| If power is run in coil section (input), function lamp (yellow) will blink and current will run to secondary side (heater lines) |
| - |
While running current, do not touch the SSR or thermostat due to its high temperatures. |
| - |
After turning power off, do not touch the SSR load terminals.
Electrical shock may occur since a charge in internal circuits may linger. |
| - |
Always keep the terminal covers of the SSR units on while power is applied. |
| - |
Keep short-circuit currents from leaking into the load side of the SSR.
If leaking, it may lead to SSR damage. |
