Hold the SV switch for more than 5 seconds to return to Engineering Setting Mode.
Characters on screen will change every time the SV switch is pressed during Engineering Setting Mode.
| ALARM |
CHARACTER |
RANGE |
INITIAL
SETTING |
| UPPER LIMIT TEMPERATURE ALARM - DETECT DELAY TIME |
ULt |
0~999 SEC. |
0 |
| Feed1 CONVEY ALARM DETECT COUNT |
LCt |
0~999 |
50 |
| DRYER LEVEL METER ABNORMAL COUNT |
FCt |
0~999 |
20 |
| Feed1 CONVEY ABNORMAL DETECT DELAY TIME |
1Ed |
0~999 MIN. |
120 |
| Feed2 CONVEY ABNORMAL DETECT DELAY TIME |
2Ed |
0~999 SEC. |
180 |
| Feed3 CONVEY ABNORMAL DETECT DELAY TIME |
3Ed |
0~999 SEC. |
180 |
| UPPER LIMIT TEMPERATURE ALARM (DRYER TEMP. DEVIATION) |
dUS |
0~40 degrees C |
10 |
| UPPER LIMIT TEMPERATURE ALARM (REGENERATE TEMP. DEVIATION) |
rUS |
0~40 degrees C |
0 |
| DRYER SIDE DISCONNECT DETECT TIME (DRYER) |
dLP |
0~999 MIN. |
0 |
| REGENERATE SIDE DISCONNECT DETECT TIME (REGENERATE) |
rLP |
0~999 MIN. |
0 |
| Feed1 LEVEL METER DEMAND DELAY |
L1d |
0~999 SEC. |
3 |
| Feed2 LEVEL METER DEMAND DELAY |
L2d |
0~999SEC. |
3 |
| Feed3 LEVEL METER DEMAND DELAY |
L3d |
0~999 SEC. |
3 |
