Filter Cleaning (Setting)

To clean filters, blow clean dry air to remove excesses.
Jet Clone Filters
Set the filter and gasket securely. Then close lid.
MGD Filters

1. Blower Suction Filter

Without removing the metal screen, set the gasket, then the lid.

2. Convey Filter

Set packing section facing downward.
Afterwards, securely close lid.

3. Exhaust Filter

Curl up exhaust filter and insert deep inside filter case. Then securely close lid.

Note
The surface temperature of the exhaust filter will run up to 130 degrees C when operating. Do not allow exposed skin to come into contact with filter.