MJ3 Portable Desiccant Dryer/Loader  
Issues > Check/Troubleshooting
Drying temperature is unstable
  1. Clog in cartridge filter (in conveying line filter case) and regeneration filter

1. Clog in cartridge filter (in conveying line filter case) and regeneration filter.
If clogged, air will not circulate, potentially leading to overload of blower.
  1. Check to see if each filter is clogged.
  2. If dirty or clogged, blow clean dry air into filter and remove the clinging particles.
    [Point]
     
    1. Wear a mask and safety glasses when cleaning. Dust/particles will disperse in the air when blowing dry air.
    2. After cleaning, set filter in the original position and fasten securely.
    3. When the filter is badly clogged, replace with new filters.
    4. Clean filters periodically. See MJ3 maintenance.
Regeneration Filter Order
Convey/Drying Filter Order
If problem persists

Return to top of the page