MGD Portable Hot Air Dryer/Loader  
Issues > Check/Troubleshooting
Drying temperature does not increase or decline.
  1. Drying heater is disconnected.
  2. Wrong setting value of dry overheat protector.

1. Drying heater is disconnected.
If disconnected, temperature will not rise.
  1. Check to see if Drying Heater is disconnected or if terminal is loosened.
If problem persists
Return to top of the page
2. Wrong setting value of dry overheat protector.
A dry overheat protector comes standardized as a safety measure. If the sensor (measuring section) is overheated compared to the setting temperature of the protector, the operational power will disconnect. .
  1. Set dial 20 degrees C higher than drying temperature
If problem persists
Return to top of the page