DMZ2/DMS2 Portable Desiccant Dryer
	Issues
	Will guide user from causes of trouble to troubleshooting.

			What types of problem do you need help with? Please select from the list below.
			[ Issues ]
			Blower does not rotate Blower is overloaded and the thermal relay trips. Drying temperature is erratic. Drying temperature does not go up or down. Power breaker trips.
			[ Alarm Codes ]
			E0 EPROM Error E1 Reverse Phase E2 Dry Blower Overload E4 Dry/Regeneration Temperature Upper Limit E5 Broken Dry Sensor E6 Broken Regenerative Sensor E10 Broken Regenerative Sensor
			[ Replacement/Adjustment ]
			Electromagnetic Switch

NOTE Before starting work, if dryer is on, please press the "Dryer" switch to stop operation. Once confirming that the unit has completely stopped, unplug the unit. Then wait for the temperature of the unit to cool down to the point where a worker will not suffer any burn-related injuries. For instructions on how to remove the filters, see the Maintenance section. Maintenance checks should be made by authorized personnel only. For parts replacement, please contact Matsui service workers or use only qualified, authorized personnel do the work..