DPD-3 Thermal Conduction Vacuum Dryer
	Issues
	Will guide user from causes of trouble to troubleshooting.

			What types of troubles do you need help with? Please select from the list below.
			[Issues]
			Touch Panel will not display. Material clog occuring in the primary convey hose (decline of conveying). Material clog occuring in the secondary convey hose (decline of conveying).
			[Alarms]
			Check details on Abnormal Check Screen and select from the following
			Blower Thermal Pump Thermal Sensor Abnormal Overheat Vacuum Alarm Secondary Convey Alarm Feeding Valve Alarm Primary Convey Alarm Drying Temperature Alarm Operation Prep Trouble Alarm Operation Trouble Alarm Setting Error Alarm Top Lid Open Alarm Hopper Full Alarm Level Alarm
			[Replacement/Adjustment]
			Air Filter (Element) Replacement Secondary Convey Air Adjustments Drying Hopper Material Dispensing Release Valve Cleaning

Note Before starting work, turn the breaker OFF and insure that the machine has stopped. Also, start work after allowing the unit to cool down for five hours. The temperature of the main unit is very high and very dangerous to work with following the immediate stoppage of operations. Should any burns be sustained due to failure to follow instructions, treat the burn immediately with water and seek medical attention. On inspections, we recommend that specialized workers from your companies do the checks. For parts replacements, no one other than Matsui service staff or your company's qualified personnel should do the work.